Originally Posted by
alexno1dj
definitely worth a go mate, ive had some pretty decent results even with rattle cans. I would get the garage/workshop warmed up to room temp though before you start spraying. I actually screened off the area i was working on to keep dust away. i used 1200 grit wet and dry to get the areas blended in, on the last coat its worth moving the masking tape/paper about an inch further out to allow the colour to blend
the new will never blend in to the old unless you use a very good quality
fadeout thinners ,and you never spray to the tape edge
as for painting in ur garage make sure you get a good 3m mask while doing it ,wet the floors down well keeps the over spray down ,any kind of heater will do get the room an panel warm as if panel cold the paint wount flow out rite ,and inperfections can be rubbed down with 2000grit an polished back