Originally Posted by
rapidonion
im going to drill my hubs tomorrow on the pillar drill in work, what size bit did you use? 12mm?
cheers mike
I ordered my studs from Burton Power which should be 12.5 but found them closer to 12.6mm. I had a decent 12.5mm drill but wasn't quite big enough so I ordered a good quality 12.6mm drill bit off ebay. I used a pillar drill and then a vice to press them in
This is the drill I bought
http://www.ebay.co.uk/itm/DORMER-A10...#ht_500wt_1127