Its totally fine with non teflon if thats all you're worried about, I'll even send you pics, when I get back to the uk
it sort of is what im worried about as i don't want them all over the underside of my car
Originally Posted by
Hoogi
Are you not running the fuel lines through the car ?
I've also made all of mine in -6 Teflon...........there is a difference between the fittings for the two differnt types of hose as well.
I bought all my Goodridge fitting from CAM Autos
Best of Luck
thanks mate they are being run under the car
the only reason im changing from standard is that
ALL the tuners i asked said i would be safer binning the standard pipes as they are restrictive and im fitting a T4 and aiming for near 500bhp
Originally Posted by
Moonstone Steve
mine uses -8 feed and -6 return.
Steve
i think i'll follow you on that
Originally Posted by
stevieturbo
If you're running them outside the car, then teflon is not needed. And you could say not preferred either.
I recall speaking to a Bowler guy years ago and he said all these fancy stainless hoses were total rubbish. I'd largely agree. But he said they all puncture far too easily. The only hoses they could use without fear of puncture was proper hydraulic hose.
where can i get that type of hose
