Originally Posted by
damien roe
yes i know that they are both stainless braid but a none teflon hose has a bend radius of 3.5'' and teflon hos has a bend radius of 5''
and im talking about the bending needed to come of the floor pan to the chassis up past the rear spring then turn to aim for the fuel pump
If you're running them outside the car, then teflon is not needed. And you could say not preferred either.
I recall speaking to a Bowler guy years ago and he said all these fancy stainless hoses were total rubbish. I'd largely agree. But he said they all puncture far too easily. The only hoses they could use without fear of puncture was proper hydraulic hose.