90bhp + 2bar of boost would only be 270.....


leads me to think they made more than 90 N/A and less with 2 bar, quickest 2 bar boost cossie i've SAW was euans, which was 550@8200rpm-ish which still wasn't the best it could/should be.

OR they were running over 2 bar, but even then that's still only 360...


a 2.0 16v at 6500 rpm max will make 150ish bhp - 2bar of boost and thats a 450bhp engine

a 2.0 16v Vtec at 8500 will make 200ish bhp - 2 bar onto that would be 594bhp.


I'd go with 600bhp on 2 bar, but I don't doubt for a minute in qualifying they were running more than 2 bar, OR they had an overboost switch for short bursts of extra boost not forgetting they would have a high octane fuel so it's not unachievable to run more than 2 bar. I don't know what they actually revved too but I dont think it'd be much hgher than 8500rpm unless they changed the rod/stroke ratio to work for them.