Um... That isn't going to make much boost. I used to run an M45 on a 2.0 blacktop and maxed out s/c RPM at 7psi with a smaller pulley. I'm now running an M62 with smaller pulley to create 15psi.

The M24 - 390cc per rev
The M45 - 750cc per rev
The M62 - 1000cc per rev.

The good news is the M24 can handle around 17,000 rpm max (although efficiency isn't great up there) so you should be able to see about 4psi with the correct pulley sizing.
It will be a good place for your to get going in the supercharger world though!

Good luck

Matt