Well, some degree of success, first thing I did was to test my injectors by carrying out a leak off test and hey presto, number one and two are faulty.
I don't know what the measurements should be but I got, one, ninety five millilitres, two went out the bottle, three twelve and four, twenty five, I did this test over one minute on idle with the engine temp up to running temp.
I would expect to see a differential of around ten percent per injector.
the kit I used cost me 175 pounds for a master kit and looking at some of the problems people are having with agents it was money well spent.
I will fit new units and let you know the results.
If anyone can tell me what the measurements should be it will be appreciated.