Originally Posted by
v man
could you not cut the water pipe that goes to the water pump then loosen the metal pipe off at the bulk head end this then twisting the bend of the water pipe toward the water pump then this should pull the metal pipe closer into the head
if that makes sence
The pipe is the only way it will go with the turbo fitted as the compressor housing is so big and close to the head as i'm not using a spacer block in the manifold due to space - the only other option for the bend is the cut and reweld at 90° anti clockwise
Originally Posted by
Ridgey
Presume that won't be in the way of the small water hose to turbo or cooler?
Clears all, just
but looks neat too
