I have for sale a set of ap 4 pot calipers (cp5100) and a pair of 295x25mm discs complete with nearly new pads

In good but used condition,
Comes with bolts and mounting brackets to fit a standard escos rear beam and maybe grpa square beams? they were removed from a escos track/rally car i was told, so bare in mind that the brackets may be ok but may need modding, would need a seperate handbrake caliper if you want/need to run one but any ap kit would regardless,
all bolt and mounting measurements are listed below for you to double check, but with new brackets and bells these would fit anything,

Only selling as these foul my custom rear steering arm set up and I have to use a 330mm disc


KIT INFO -

DISC SIZE IS 295MM
DISC THICKNESS REMAINING -24.9MM
PAD THICKNESS REMAINING 11MM
BELL PCD IS 12 X 177.7MM
BELL OFFSET IS 20MM FROM HUB FLANGE FACE TO OUTER FACE OF DISC

BRACKETS
130MM BETWEEN CENTERS FOR CALIPER MOUNTING HOLES
90MM BETWEEN CENTERS FOR BEAM MOUNTING HOLES

If you need any more info please ask


















Just want to get back what i paid for them and the new bolts last week

£500 delivered