Now that the car is home and the bodywork and paintwork is done i have no need for the 2 Clarke car dolly's i bought.

These are the 6" wheel version as shown in this link

http://www.machinemart.co.uk/shop/pr...-dolly-trolley

Here is a pic of my fiesta on the dolly's, i used some metal box section to slide over the main cross bar and bolted it through, then welded up a small frame to bolt to my shell etc so there is 2 12mm holes in each main cross bar but makes no difference

Will come supplied with the original v stand parts as shown in the link above and my welded up metal frame bits if you want them





£180 the pair collection only as they are very heavy

I am based in Wickford in Essex

Thanks
Marc