Originally Posted by
scoooby slayer
whats the limit of 2 bolt main small block bottom ends steve ? thats my only other concern.
its all just cheap stuff im looking at, manifolds are £130, both turbos £300 for the pair, i reckon i could do the whole job for under £1000 intercooled aswell complete twin t3 turbo set up like 2 standard cossie turbos.
or a 383 stroker kit is about £1000 aswell but i think just the stroker would just add about 50 hp. im currently on the double hump heads aswell 64cc i think but pretty sure on soft valve seats so running millers with the optimax at the moment.
If you were building an endurance racer, perhaps you could be concerned about many things. Ive no idea on your specific engine, but Ive turbocharged plenty of other engines, and never worried too much about things like main caps. It's unlikely boost will create any problems there. High rpm's maybe, but not a little boost. I assume it's already a big heavy strong iron block ?
And what are the heads made from ? Surely nearly all American engines will be fine for unleaded ?
Certainly at less than £1k, yea go for it. it would be a waste of money to do stroker and turbos though, and a stroker will place more load on the main caps than a bit of boost.
But dont forget to budget in for proper fuel and ignition control. Although a carb/dizzy could be made to work to a degree as well. No idea what you're using at present ?
Even if you had to stick to a carb, I'd still go for mapped ignition with boost. And fix that oil pressure, it's far too high.