Thread: pectel incar 10 position boost controller
View Single Post
Old Feb 10, 2005 | 08:54 PM
  #3  
Anonymous's Avatar
Anonymous
Banned
 
Joined: Dec 2002
Posts: 142
Likes: 1
Default
Air to Air POT
0 volt to pin 11, 5 volt to pin 30 ,triger signal wire is to pin 9 on p8 or pin 26 on l600 l8
3 wires, black read white, did i say white is pin 26, black is earth @ pin 11 and red to pin 30
Reply
0