http://www.bigturbo.co.uk/ Good link here if on P8/L8/L6/L1 . On P8 The 12v fused Ecu relay feeds the 12v fused fuel pump relay and is earthed at pin 10 and 28 on the Ecu . The amal valve is fed 12v direct from the fuel pump relay aswell as the fuel pump itself .I Cant tell you where the relays are, on a saph they're above and behind the glovebox . Have you had the crank sensor checked as this can cause the pump not to prime iirc .
Just seen small turbo -
non webber sorry guys
Last edited by opposite lock; Oct 16, 2011 at 07:07 PM.
Reason: clocked the st too late lol