Originally Posted by
Rob_DOHC
Good point about the VE table, however i didn't find that worked for me, i just couldn't get a good idle. Now with the correct dead time (or near to the correct dead time) it idles a million times better,
---
Cheers guys, hope it helps some one, or at least gives you somthing to fiddle with!
Rick i'll have a google on the ev14's
Rob,
i think the dead time works best at low resolution as the ve table can't seem to get it accurate enough to drop out 0.1ms or less at that level.
ms3 however can sort this out as it has 0.1 resolution rather than the ms2 which can only use whole figures, one reason i'm planning a change before too long.