Originally Posted by
xr2wishy
i had a play with this recently, more to do with the voltage correction/injector setting than anything though.
the dead time did make a slight difference, but your ve tables can sort that out, just need a fraction more adding to the ve values really.
i will be going back to the dead times as i have figures for my injectors off someone else who had them flow tested etc.
good post though, may help some out.
Good point about the VE table, however i didn't find that worked for me, i just couldn't get a good idle. Now with the correct dead time (or near to the correct dead time) it idles a million times better,
---
Cheers guys, hope it helps some one, or at least gives you somthing to fiddle with!
Rick i'll have a google on the ev14's
Rob,