Thread: S2 RST mastercylinder & servo dome nut adjustment (solved now)
View Single Post
Old Aug 21, 2011 | 07:33 AM
  #1  
Antti O's Avatar
Antti O
Too many posts.. I need a life!!
 
Joined: May 2004
Posts: 844
Likes: 0
From: Mikkeli, Finland
Default S2 RST mastercylinder & servo dome nut adjustment (solved now)
Look to last post -

I have possible faulty master cylinder, front brakes do not full release after braking. Rear brakes are way too powerful too.
What do you say can i replace my s2 standard master cylinder with this one?

http://www.ebay.co.uk/itm/FORD-ESCOR...item20baee3260

I know there is some pipework ahead because that m/c do have 2 outputs for front brakes and 1 for rear circuit, my current mc does only have 1+1 outputs.
Is 22mm mastercylinder enough for cosworth 4x4 fronts & rear disc brakes?

I am so tired with brake issues, 3 summers now wasted with this shit.
Last edited by Antti O; Aug 31, 2011 at 10:32 AM.
Reply
0