gt3076r brand new garrett turbo never used it has .82 exhaust. compressor is 57mm inducor and 76.2 exducor,56mm trim and a 60mmturbine wheel 84mm trim good for 530bhp it is externally gated £720 Sold




200 short block rebuilt with wiseco 91.5mm piston with a 8.1:1 compression ratio. fitted to h section conrods with arp big end bolts . it has a new knifed edge crank bought from pj motorsport . burton power high flow oil pump and 2wd sump the block has been machined for mountune long studs which have been fitted and the block has been deck to take wrc head gasket. engine was built by myself as i build prototype ford engines . the short block cost me well over £3000 to build so a bargain at £1200






2wd ceramic coated exhaust manifold cost £220 to get coated £70


sweedish manifold unfinished needs fuel rail lugs welded on £60 Sold




2wd inlet manifold and throttle body finished in wrinkle black needs touching up £50



iskey double valve springs and titanium retainers and collets been fitted but never run £80

cosworth cam cover with breather pipe painted in wrinkle black with new bolts a few marks £30 SOLD

motorsport ht leads in good working condition £30

bailey swirl pot and blue silicon water hoses £20 SOLD

starter motor in new condition £15 SOLD

intercooler blue silicon pipes with dumop valve take off £20

fuel rail and regulator in wrinkle black £10 Sold