Originally Posted by tabetha

It isn't a pug 405 rear disc, there 247mm but height is 34mm, and those are much higher, just measure then from the wheel face to the disc face(outer), I can simply add the disc width to find the height.
They could well be from a pug, but there's also at least 5 other makes they could come from, 4x108 was very popular years ago for a lot more than just ford.
Without the measurement of the hub to disc face it's a guess at best, just put the vernier on the edge of the disc/wheel face and do the depth measurement to the disc surface, adding 10mm will give the height.
I note the larger centre bore hole, which could well suggest it came from something other than ford ?
tabetha