well there's the problem, i have the rod adjusted that it just goes over the arm of the wastegate, if i make it any longer my wastegate will be open all the time. Ecu is adjusted i think when i first had the actuator on before adjustment it went over 1 bar without cut out just kept going. in 1st and 2nd i constantly have 0.55 bar as it's supposed to be but in 3th 4th and 5th the gears are longer and the higher the rpm the higher the boost. highest it goes is like 0.72 bar. And from what ive heard the amal valve gives 2 fast clicks when unchipped and 2 clicks with delay if chipped. mine gives 2 fast clickes