Originally Posted by
juffer
Im having strange boost problems. I have a lot of preload on my arm (about 9mm) and im running 12psi of boost. I turned up the boost using a bleed valve a quater of a turn and it's hitting 21 psi. I thought the bleed valve was at fault so i removed this and run standard actuator pressure. Its now 10 psi.
I have nothing inbertween 12 and 21 psi.
You have answered your own question... Bleed valve is faulty or just extremely sensitive!
Without it you will only make actuator preload pressure, as you are.
I dont know why Stu suggested another actuator as it is doing exactly what it's supposed to if it's holding 10psi without problems?!
lol