Tried tapin it in and cleaned contacts, i thought it was better, but it just behaved itself for a minute or 2 but its no diff...
Bizarely the stage 1/165 chip i have works fine with the beiges with no probs at 0.8bar boost it pulls fine no missing etc, but the stage 2/195 chip that should allow 1.2bar seems to be misfiring/boostcutting at all different boost levels on spool up, once the max boost (arnd 1bar atm) is reach the mifiring/turbo stalling/boost cutting stops and it pulls hard and consistant!
Could it be my MAP sensor getting a boost spike before my boost gauge, so my gauge is showing 0.8bar when infact the MAP is getting 1.2+ bar?