Thread: New to this detailing lark - Now with pics!!
View Single Post
Old May 21, 2011 | 05:49 PM
  #3  
uruk hai's Avatar
uruk hai
Too many posts.. I need a life!!
 
Joined: Jan 2009
Posts: 902
Likes: 6
From: Bristol
Default
As said above when you clay you can’t use too much lube and don't worry about running out. If you do just mix up a water and car wash solution and use that as lube ! If the clay bar is 100g I would cut it in half, a 50g piece will be big enough and if you drop it on the floor you'll still have the other half ! While your claying constantly check the surface of the clay and as soon as it isn't clean fold and re-work it to get a clean surface, if the clay gets a bit stiff then drop it in a mug of hot water for a few minutes which will soften it and make it easy to fold and re-shape. Once you’ve clayed the car give it a good rinse off and then start your polishing, good luck and get those pics up when you’ve finished
Reply
0