Hi all. I need some help and advice please.

As some of you will know I have been rebuilding my 2wd sapphire and today was the day to turn the key. Unfortunately there was no start. The engine turned over fine but didn't even cough as if it were trying to start. So I checked the obvious below.

Spark at the plugs.
Fuel up to the injector rail (as there was a leak from the fuel feed line in the engine bay which I fixed)

I also took the spark plug out after trying to start it and it was dry. I expected it to be wet with fuel but nothing.

I checked the injector plug with a multimeter and when cranking there is around 4V (obviously pulsing not constant).

The engine has been sat for around a year without running but built up. I have replaced the injector rail as I had a polished one to go on. Injectors have been externally cleaned but not tested. However I would see no reason why all 4 of them have packed up together?

Any ideas please guys? If you need the spec of the engine please ask but I would think it should start regardless?

I have only got Tuesday to get it running as it is booked in for a base setup on Wednesday am and MOT in the afternoon, and I am working the days inbetween.

cheeRS