Morning all...

First post on here and I'm begging for help?

I'm currently running a custom turbo setup on a 1.3 Nissan Micra ( I hear you laugh!! )

I'm using the stock t2 from the frst

I have both turbo designs

Just oil and oil and water

I've been reading about the t2/t25 hybrid conversion but after 3-4 days of searching I can't find the answers I need

Basically I'm wanting to keep the turbine housing (I think, the bit which bolts to the manifold and has exhaust elbow which has a/r 47 written on it, I don't want to change position of manifold or downpipe

Compressor housing has a/r 48 written on it

Now is it as simple as finding a t25 which has the ar 47 so it fits onto the turbine housing?

So what t25 fill fit please??

Does the a/r 47 have anything to do with the size of the compressor end that fits

So I need to get a t25

Take it apart like this




And I want to bolt it on here if that makes sense



I understand I may need to squeeze the spigot ring to turn the compressor housing and may need to redrill the actuator mounting points

I hope this all makes sense please please turbo gurus I need you help





The