Fully Rebuilt SCS 400/400 spec from top to bottom.
The engine is ready to install and run,L8 pectel ECU,jetted amal valve also supplied as are the ancilliaries such as P/s,altenator,belts.

Its ready to plug and play,and will make a reliable track engine or a great road engine.
It Was built/dynoed on the SCS dyno @ 406.5 BHP/402 FT/IB with full dyno charts back in '04' and after 30k miles we have fully rebuilt it,so its a totally fresh engine with everything replaced.

Spec:

.New 7.6-1 comp Mahle pistons with valve cutouts,new rings. .5 overbore

.Fully rebuilt polished and ported Nick Waples head with new guides,seals

.SCS cams

.Polished crank with new bearngs

.New genuine INA tappets

.16 New ISKY valve springs (Normally 8 are only fitted.)

.Mountune WRC Head gasket

.WRC 6 stud block

.T34 .63 turbo,360 bearing -31 act

.Big wing baffled sump-4.5 ltr

.Kent adj vernier pulleys

.403 Grey injectors

.New genuine Ford Dizzy/Leads

Transmission:

.Alcon 6 paddle relined clutch kit

.Rebuilt front Diff