the throttle reading is permanently showing 100%, weird stuff, i have double checked the wiring and i have connected the correct wire to 17.

any ideas?

plus how the hell do i adjust the boost with it? i've tried adjusting the a and b settings but it makes no difference, it wont run anymore than 1.5 kg/cm of boost (according to conversion charts about 22psi)
and it doesnt always go this high

i am running a t35 hybrid with an almost fully wound in actuator rod on a -34, before the avcr i could run at least 28 psi if i wanted to through 2 stage amal valve