Originally Posted by
cossiedave
why have you had that fitting welded there ,now if you put the bottom pipe to the big wing sump you will have problems like i did , it will fill the header tank with oil and keep pumping it out till you got none left in the sump and you dont want that the spec-r breather you have there is NOT desined to work like that iv been there and done it give me abell if you want
hi dave i dont understand what you getting at there?
brammer has a oil seperator as well as the catch tank.
the seperator will seperate the oil and air and brammer will have only air and crap going into the catch tank, no oil at all.
the fitting he has welded on is'nt in a good place because there's a plate inside the catch tank to seperate the crap from the air.
it should have been fitting to the same side as the other fitting.