Hi,just after a bit of advise off you guys.On our old Focus I fitted lowering springs and ended up cutting through the rear lower arm bolts because they were seized in the bushes.Removing the old bushes which was a nightmare and using poly bushes.We now have a 2004 one which again I have lowering springs for and again the bolts are seized.I've tried to compress the springs in situ but the threaded bar hits the arm.Has anybody had these problems and any sugestions as to the easiest way round it.I have got new bolts and poly bushes just incase I have to do it that way but was very time consuming last time.Any advise would be greatly appreciated,
thanks
pete