Lee
as promised the wiring that i did on mine
it prevoiusly had a 1afa ecu if i remember rightly.

ok
edis pin2 b/y wire remove and tape up

boost control need bn/gn wire from ecu pin 33 to boost control solenoid
other side of solenoid bn wire to earth.

c/o signal bn wire can either be on ecu pin 8 or 27 mine was allready on pin 8 so thats where i left it.

by the way my ofac ecu is the series2 one ( hence reason why superchip would cut my boost at 15psi)
hth mate
thanks
Dave