Originally Posted by
NIL8R
Many spot welds, no continuous welds as is often incorrectly implemented. For a good idea how to. check out "weldingtipsandtricks and V8TV on youtoob. Very informative for the beginner.
Cut back to solid metal, make the panel fill the hole with a 1mm gap, clean every God damn thing in sight, be patient, don't lose heart and enjoy the day.
Hope this helps and good luck with your project.
Great advice,a good grinders handy too.make sure the earth clamp goes onto a really clean metal surface,I had to grind some underseal off my Cossie to get a good earth as the lead wasn't long enough!!!!