Originally Posted by
JesseT
So, you are driving six injectors (for a V6?) from one single ecu channel? And the channel has the capacity to drive 6 high impedance (12Ohm) injectors, so a total of 2 Ohm load and 6A of current?
If so, then batch the 6 4Ohm injectors (this makes 0.67Ohm) and put one 1.3Ohm 50W resistor in series of the batch.
Just make sure your ecu is up to this.
yep, six 12 ohm injectors on one channel (it may split into two nearer the ecu but that doessnt matter i think) so one 1.3 ohm 50w it is then lol