Originally Posted by
BRAMMER
Cheers Jon
So this is the fitting
(AN-10) 7/8 JIC x 3/8 NPT
http://www.hosefit.co.uk/catalog/pro...30f59c870b947b
Justin i'm going to run one of thos fitting from the exhaust side of the block (AN-10) 7/8 JIC x 3/8 NPT then run all 4x AN-10 and the 1x AN-12 from the separator.
Thats it sorted -
But just curious as to why you would run -8 on the return as opposed to -10 that is fitted already?
yeah there's no problem running a -10 as your return
most people use -8 and i thought if you used your reducer you already had on the bottom of your seperator it would save you money on fittings & hose because -10 are more expensive.
