finally getting close to finishing the barsteward so i thought id post up a pic or two!

been putting a CVH into it over the last few months. its taken a while due to time and money problems, but im almost there!

its had mk2 xr brakes put on and fully adjustable avos on the front aswell!!







it runs but as the carbs werent properly serviced before i had the engine, and theyve sat for a while they need a refurb. plan to chuck a DFT on it while i do this, plus itll break me in gently to the power of the thing, the engine was dyno'd at 148bhp @ fly before i had it... its now got a proper exhuast on it (2.5" side exit ) and new ignition so should be a bit up on that!

failed my test yesterday (wanker examiner....got 3 minors... and an arsehole undertaking me made him fail me!!!! ) so ive got time to finish it off properly. going to reloom it, repaint the bay and refit new/cleaned parts as the engine bay is minging. while the dash is out for the reloom im gonna weld in an airbox into the bulkhead so i can fit larger trumpets. hopeing to do this while im off college for 1/2 term in a couple of weeks.

picked up some slicks on sunday to, avons, slighly worn but will be spot on for some 1/4 mile runs or 0-60 attempts!! gonna try and get some cheap S2 rims and paint em black - super hard



low profile so not much if any bigger than the 13's on there atm!!



we mean business!