hi chummer, heres the pics for the rear quarters...

ull begin with this



first take off the c piller and b piller plastic panels (the ones which have the front seatbelt and rear seat belts on) then you need to get the existing quarters out...easily done...just use your foot or get someone to push the window out from the inside while your gently easing the rubber out with a screw driver or something...its harder to explain than it actually is doing

ull be left with this





next put the rubbers into the window frame



then bring the new window into place...you may want a friend to help at this point as it can get tricky...line up the rear bracket first into the 2 holes that are already drilled for you



then line up the front two...you may or maynot have holes drilled there already...if you dont...then line up the window while someone is still holding the window from the outside and then drill 2 holes...one per hinge



screw everything down...and there you have it



bassboy