View Single Post
Old Nov 21, 2010 | 02:01 PM
  #29  
Miller 3's Avatar
Miller 3
PassionFord Post Whore!!
iTrader: (4)
 
Joined: Nov 2006
Posts: 9,407
Likes: 12
From: rainham/kent
Default

Originally Posted by rsmark86
the car is as follows



but stuff it im going for an inlet and remap from mark and he said the limit is 580bhp before i need an exhaust manifold change but i just want a nice 520/550bhp....

it was mapped at 2.2bar and has seen 520bhp before so just need a boost pipe...



My advice would be that if you only want 520/550, id downgrade the turbo to a GT30:76 the same as mine. you will find quicker spool up just not the top end power that the 35 is capable of. although that 35 dose seem to spool rather well if that is correct?....

and id also check the inter cooler before you order a hose as the 70mm you put is most probably how thick it is as apposed to the end pipe size, there more likely to be either 63mm or 76mm

Id even hazard a guess that you are on a 2wd ex manifold as there is no way you would get that power from one of the 4x4 variety!!
Reply