Originally Posted by
Blakeya
The Problem will be that one of the bearings will have fallen out of the inner CV Joint, Probably on the N/S. Remove & relocate before you do even more damage to the joint.
Regards
Andy
+1 id put money on it being this
also you dont need alignment tools when doing clutches either, ive done loads on mondeos, i take subframe completley off if i need the gearbox out or if im just changing the clutch i loosen the drivers side and drop the passenger side which i support with gearbox stand and then just drop the box onto the subframe leaving just enough room to change the clutch
all i do prior to removal is spray some paint around the four corners of the subframe to give me a reference point to put the subframe back to ive never had a single problem doing it this way