Forgot to update this, so heres a loads of things in one post

Few more bits off and its on the ramp now.







Another small update, got the powersteering, brake and hydraulic clutch systems drained. Disconnected the last of my Fraser wiring loom, removed the header and power steering tanks. Removed the oil cooler and lines and drained the oil out of the front diff. Just working away at my own pace as there's no real rush to get it finished






Quiafealicious :P


Also decided to change the slam panel as some absolute wab had welded an amal valve 'bracket' (I use this term lightly lol) to the underside of it. No neat welding though, it looks like pigeon crap lol. I've a new geunine Ford panel in the attick, so may as well make use of it!
I think this project may have to include front suspension components too lol








Got a bit more done, pulled the Engine and ABS wiring looms back inside the car. Also cleaned a lot of the waxoil off. The bay is going to need a good powerhose to shift some of the hard to get to crap/waxoil. Painter has been to quote for painting the bay, fitting a new slam panel and redoing some of the seamsealer





Mmmmmmmmmmmmmmmmmmmm wiring :P

Two f*cked Cosworths