Perfect, thanks for that.
Thats what I thought when we were chatting by PM but I couldnt give a defnitive answer as ive only done it on L8 not L6 and didnt want to make an assumption as obviously its a pretty important thing to get right!

Icekottarinn, all you need to do now, is try grounding out pin 13 and check with a timing light that it does indeed take 2 degrees out, you can do this at idle as its a global modifier.
Assuming that works, then when your nitrous is activated it can ground that same wire for you to remove timing while you are on the gas.

Regards

Chip