View Single Post
Old Sep 28, 2010 | 10:50 PM
  #8  
J1mbo's Avatar
J1mbo
B1mbo
iTrader: (1)
 
Joined: Sep 2007
Posts: 14,986
Likes: 1
From: Peterborough
Default

Originally Posted by Cossiestu123
plug gaps set to .60 mm

ordered new coolant temp sensor, and a charge air temp sensor (should be with me tomorrow)
and intake mainfold gasket is new so fairly sure its not a vacum leak
is there tests i can carry out on the tps?
and excuse my newbyness but whats a ISCV?
They're good then

You gapped them with a feeler blade at an angle yes and not flat across the top as the electrode dosnt sit on top of the plug on a 071c

I wouldn't advise changing throttle position switch as you have no way to tell if you have set it right, you need a engine monitor to do this, a Job for a specialist

Your idle problem, did it always do this or has it just come on ?
Reply