I see two small pressed dimples in each side of the chassis. I assume this is what you are talking about. My issue is that the towbar that was supplied to be fitted up to these dimples does not match. It has predrilled holes in the towbar which are approx 3-4inches apart but the dimples in the chassis are about 5-6 inches apart so they do not meet up. So would it be safe to assume that this is the wrong towbar for this particular car? Secondly, I have the hood retraction motor situated in the boot directly on top of where one side of the towbar bolts would come through, I assume thios would need to be repmoved and reseated on top of the towbar bolts?

Thanks for everyone who has helped me with this problem so far.

Johno