Right lets see if the collected genuis of PF can get my 3 Door started.
In May I blew the engine up at Brunters got it AA towed home drove it off the back of the recovery truck on 3 cylinders into the garage.
Had the engine rebuilt and new Ryan loom made up (the only things that are new to the car)
Put the whole lot back together now it won't start.
No Spark and sometimes the injectors don't fire either (noid tested)
When you turn the key the coil fires all plugs once then nothing.
These are the parts I have changed:
Coil Amps (Both)
Coil (tried 2 different ones)
WRC Cam Sensor (3 different ones)
2 Phase Sensors (tired putting the old dizzy back in and then another one to make sure)
HT Leads
Crank Sensor
Map Sensor (just cuz I had a spare one)
Loom
ECU
Also put my old loom back on to check Ryans but it still wont start i've cleaned up all the earthing points and even added extra earths direct to the battery.
And to really make it wierd it did start for about 30 seconds when we think the dizzy was timed up incorrectly haven't been about to reproduce that thou
Rich