I finally got some paint and laquer on the engine bay today, its taken me a while to get it to this stage, lots of rubbing down etc, I also removed the charcoal canister bracket and the bracket that used to hold the fuse box in place ( the fuse box is in the glovebox now )....

I'm going to start putting things back in the engine bay over the next 2 weeks, so keep looking for updates....











I took a leaf out of Coskev's book and took off all the sealer around the front strut tops and the bulkhead, then used a small run of tigerseal instead of the huge thick seal that mitsi used, looks 100% better....





I'm 90% happy with the results, i always wanted to get rid of all the unwanted bolt holes but it was far too big of a job for me to tackle in the time i have, but 90% is good.

My next job once the laquer is dry is to treat all the chassis leg cavities etc with Dinitrol and the seal up with Tigerseal.

Getting there slowly..

cheers

Andy