Old Aug 10, 2010 | 08:05 PM
  #1  
bigbill's Avatar
bigbill
Regular Contributor
 
Joined: Jul 2003
Posts: 321
Likes: 0
Default Brand new built YB engine never run good spec

completely rebuilt 205 2wd cossy engine built to be 450 bhp

all engineering work carried out by CTM north london

all parts acid cleaned and painted where neccessary

rebored plus .40 block and light resurface to deck

lightened and balanced cossy rods

lightened and balanced crank and flywheel (resurfaced) fitted with new arp bolts

new 8:1 comp woosner pistons

new high pressure oil pump

new mains big ends and thrust bearings all vandervell/cossy

crank reground plus .25

new arp stud and nut conversion and metal head gasket first light skim to mint head

head presure and crack tested reground valves new stem seals and hydrolic tappets

BD14 inlet and BD10 ex cams mint cond with new verniers and burton race belt and tensioner

new alternator with alloy v belt pulley, same on new waterpump, REYLAND bottom pulley and new crank cam belt cog

all new sensors, cps ,dissy pick up ,tps rotar cap leads plugs etc

joe stevens big wing baffled sump moded to fit mk.2 WCX member (will still work in cossy),carbon aero quip breather system and oil seperator

new ht racing swedish plenum (to be fitted)

have got 2wd or 4wd exhaust manifold

NO TURBO INJECTORS LOOM OR ECU
was going gt30 660 siemens and motec

this engine has a full photoghraphic rebuild to the highest standards by t craig ltd and has cost well over 4.5 k

£3500.00 ono

Contact Iain on 0035387 8170345 or 01883 744179

Engine is located at RH9 8BA

Last edited by bigbill; Aug 11, 2010 at 08:55 AM.
Reply