I think your probably right tabetha as the pedal box is still in the car but cant see a bonnet pull hanging anywhere inside the car. Ive put it out through the 3 holed rubber grommet as i looked at my mates 4x4 saff 2nite and thats where his goes through, also i couldnt see anywhere else where it could go and couldnt think what else should go through the spare hole in the grommet.
Do you have any idea where the ABS loom should be routed under the bonnet? Wanted to try and get it in place before i fit my rad and intercooler in case it needs to go behind it. It comes out the bulkhead on the passenger side and somehow runs across to the brake fluid resevoir on the drivers side, it seems too long to go straight across the bulkhead but too short to go up the passenger chassis leg, across the front crossmember and back down the drivers chassis leg.