Thread: anyone have a step by step to fitting an actuator?
View Single Post
Old Jul 27, 2010 | 12:11 PM
  #2  
smartrs's Avatar
smartrs
I've found that life I needed.. It's HERE!!
 
Joined: May 2003
Posts: 1,115
Likes: 0
From: Out in the sticks
Default
bolt it on with the 2 studs on the actuator then refit the rod to the waste gate and refit the clip to the waste gate rod

not sure what else you need to know . just make sure the rod is set to hold the gate closed

sorry if thats no help ?
Reply
0