Originally Posted by Versus_Creations

You can test all the sensors with a multimeter i dont see why you would waste time guessing.?

Get a wiring diagram off the net and check the voltage and resistance in the TPS and compare it to what it should be.

Chances are the TPS is closing too much and causing the problem try opening the throttle butterfly with the cable a little then start it up and see if the error happens. You should set this sensor with a multimeter at closed throttle and make sure it reads fully to full throttle with no breaks.

you can test each sensor in similar ways. If you need more help how then i have written many tech threads just need to know where to look.

Regards
Jano