Originally Posted by
KSA-Cossie
Ayup me howd,not a clue but give it a good bumming.
took it out on the wife last night,well and truely kosmanned
Originally Posted by
retro d
Check the fuel pump wires corrode, if you cant hear the pump motor give it a tap with a hammer with the ignition on and see if it primes.
I think the wires you are on about are the feeds to the coil are they clean. ? check the feed woth a test light, but go for the pump first.
yeah dude the wires are clean,but it had two new coils not so long back so im wondering if we disturbed summat
Originally Posted by
Captain500rs
Coil could be on way out or its the wiring on the plugs, mine actually cut out today and it was the wires on the coil.
can you get these rewired then? mine are all taped up with other wires,its alreday had two new coils
Originally Posted by
Glenny Boy
Is yours a 2wd saff?
yep glennyboy,its not no girls car
Originally Posted by
gaz4x4cos
i had same last weekend it was a dodgy joint on coil every time i moved one of the connectors on top it would cut out or not start just turn over , i thought fuel pump at first too . been pricin up a group a coil cos it has spluttered a couple of times at random when drivin too and i think it was that now i initially thought it was fuel tbh .
cheers
gaz
sounds like mine,it did splutter a couple of times yesterday but i thought nowt of it
Originally Posted by
tabetha
If the car has already been brought up to temp, then generally they don't prime, this has nothing at all to do with the pressure already in the fuel rail/line, as there is no pressure sensor the ecu can't know what pressure there is, it is a time/temperature based decision whether to prime or not, and each car can be very different.
Sounds more like a loose connection, just do the wiggle test with the engine running, better to sort now than pray when in the outside lane of the M25 when you remember what you forgot to look at!!
tabetha
my fuel pump wiring got checked last year and was deemed to be ok,we wiggled it and rocked the pump and all sorts and it wouldnt go,its only when we wiggled the wires on the coil that it went,whats getting me is that it hasnt played up for weeks,then just does it out the blue yesterday
Originally Posted by
COLEYST200
Have a look at the wires going to the fazz as iv nown them to brke down and have the same fult as you have
you mean phase sensor dude? the one in dizzy? it had new dizzy plugs and leads not so long ago