Thread: Were's simon aka flux capacitor?
View Single Post
Old May 29, 2010 | 03:43 PM
  #23  
jon@work's Avatar
jon@work
Advanced PassionFord User
20 Year Member
iTrader: (5)
 
Joined: May 2004
Posts: 2,400
Likes: 8
From: Nottingham
Default
Originally Posted by Flux Capacitor.
Originally Posted by jon@work
Hi Simon

As I asked on the other thread, can you "make" an interface that will allow one of these http://www.race-technology.com/ecu_i...es_2_7533.html to work with a Dash 2 from a L8 (with Iss3 Pectel board and coilpack board) please ?
Yes I could but not specifically as that would take lots of time just to help 1 person and I dont trade anymore.

However, as some PC's serial interfaces dont work with the kind of software I am developing, I have designed a multipurpose interface that allows any pc to talk to an L8 or P8.
This is a USB interface speciffically designed to talk to weber ecu's removing any incompatiablity issues as sufferred by the MSD/RP Labs software.
This has a RS232 interface so could be adapted to do what you need, however, I dont know much about that product you mention but will have a looksie

This interface, design and run time code will be available for anyone to build themselves once my software is released.
Brilliant - thanks Simon
Reply
0