this is a cosworth l6 management, with pectal board wasted spark, and to run coil pack etc all ready mapped to 18psi by msd for a 1600 cvh running green injectors, perfect for efi or anyone wanting to convert to efi setup for an rst,i also am led to believe the ecu is enabled to run a collins monitor if you wished.
this is the kit
l6 ecu,l600 pectal board. wasted spark, and coilpack drivers, mapped to 18psi
efi powder coated inlet fiesta charge carrier, fuel rail and reg, all ready for cosworth
1800 cvh,pully, alternator,and crank trigger
full 2wd loom to run rst
brackets







theres also a matching fiesta rst crossover/ charge carrier which is not in the pics but is in with the sale. the date on the mapping was only november 09, the wiring is wrapped in a nice cloth material


only parts which you would need are as follows

green injectors, cosworth throttle body,air temp sensor,water temp sensor, and maybe a top sensor bracket as the one i have has had the lugs taken off to run on a zetec turbo but if your good with a welder can put 2 lugs on, or they can be bought easily and cheaply from jano at oddkidd creations. so once you get these parts you should be ready to run, and is mapped to 18 psi i believe with the other bits there this is a £1600 worth of kit if bought new and have paperwork with the mapping alone which is £500,so i would think for this £600 NO OFFERS
cheers jonny