when using a voltmeter on pins 1 and 17 of the ecu plug, i see readings between 0 and 0.3 volts, i beleive i should be seeing more like 4.5 volts when throttle fully open. I have had electrical problems before now, with a different chip i was running. it was an MSD chip, and i had damaged a leg on the lower piggyback module during install, and persumed this was giving me problems.
I now have a brand new ahmed chip with new pectel babyboard, yet i appear to still be having issues. I would just like to have it checked over to make sure the ECU isnt a dud.

Cheers.